Should I make my own Pottery Glazes?

Coloured glazes used by Tinkling toadstools

This question has caused a lot of debate among potters. It is a similar question to "should I make my own bread, cakes or pastry?" Clearly there is no right and wrong answer. People who bake their own bread and cakes do so for numerous reasons. Whether it is to reduce costs or make it fresh or make it taste better; all are valid reasons. However most do it because they like it and the self satisfaction it gives them to create something of value.

 Similarly, the potter will often claim that making glazes gives him the same type of satisfaction, is cheaper and gives him more scope for creativity! But lets look at the issues involved in making glazes in detail to see if his claims are true:-

 Costs

Glaze materials

There is little debate that buying the glaze materials to make the glaze can reduce costs significantly. Common materials such as clays, felspars, silica, frits and pigments are all readily available from a number of suppliers. However, often they are not in the ideal form to produce a glaze without additional processing. Most need at least a number of processing steps to make a satisfactory glaze. These steps include, preparing a recipe, grinding or mixing with water, sieving, magneting, testing, and controlling the glaze slip consistency using additives. The time and knowledge to correctly process and test the glaze are mostly overlooked when cost comparisons are made. For those with time to learn about glaze materials and the process this is not an issue. However for many hobbyists who are time poor it clearly does not make sense economically.They are better using reliable commercial glazes.

Creativity

Unique copper ruby glaze

Without doubt making your own glazes is a creative exercise. Again using the same cake making analogy as before, you have complete control of the make up of the glaze and how it will look after firing. Just like cake recipes there are thousands of recipes for glazes each giving its unique colour, texture and appearance depending on how its fired. This uniqueness is what many studio potters strive for.  By varying the pigments and make up of the glaze in theory you can innovate to your hearts desire! Therefore creativity can surely be improved by making your own glazes!

Technical restrictions

In practice, however,  there is considerable science behind making acceptable glazes:

• The glaze needs to technically match the body or the glaze may just peel off like old paint. 

• There is a limit to the range of compositions that can be made- for example some recipes will just never make glossy glazes.
  
• The firing cycle and atmosphere have as great an affect on the glaze appearance as the recipe.

The fired glaze surface of functional tableware needs to pass the requirements of legislation e.g. toxic metal release into foodstuffs.

So if you want to be creative with glazes you also need to have some technical knowledge. Potters without a scientific background may struggle to understand these technical parameters and hence making glazes could ultimately become more trouble than its worth.

Health and Safety

Unleaded Glaze

In recent years this issue has grown in importance for potters making their own glazes. Lead, for example, is being phased out in commercial glazes and its use and safety has been severely questioned especially in the USA. Other materials such as Barium compounds need to be used within strict guidelines for safe use. Even pigments such as cobalt and nickel oxide have been questioned over their safety. Clearly there is a lot to learn technically to comply with health and safety during the making of glazes. These issues are understood by commercial glaze manufacturers who can provide up to date data sheets on the glazes they manufacture and supply.

Equally important is an understanding of the legislation that applies to the fired product to meet the demands of the end market. Functional tableware has to meet much more legislation than ornamental ware in the various countries around the world.

Summary

In summary making your own glazes safely and successfully is much more difficult than at first appreciated. Technical and health and safety issues are not easy to overcome. However for a potter or hobbyist with a scientific understanding he can indeed be more creative and lower some material costs by making his own glazes. For the uninitiated it will be a long road of trial and error and frustrations. For those determined to try I recommend you do some reading and preparation online or in the wealth of books available before you begin. 

Good Luck and Happy Potting

The Potters Friend

More information and other technical articles on pottery and ceramics can be found at my website The Potters Friend.

Go now to sign up for my free newsletter.

Inspirational pottery glazes

The special ceramic materials and process

Reactive coloured glazes

The first article of my series on glaze making identified the basic ingredients used in glazes as silica, felspar, frit, and clay and explained how a little science would help speed up your artistic flair!.This second of the series on glaze making discusses the non core ingredients of a glaze and explains how a little science in the form of good processing can ensure that you achieve the best result from your glaze making efforts.

The 3 Basic Questions

To make truly inspirational glazes we need to establish at least 3 things

1) What type of glaze we want to make?

2) What type of body it will be applied to? Stoneware?, Earthenware? Biscuit? Clay?

3) What firing temperature/cycle do we intend to use?

Once we have the answers to these questions we can begin to formulate the glaze.

The choice of non core glaze materials

Making a silky matt -what to add to your basic glaze

Silky Matt glaze

Let us assume we want to make a white silky matt textured glaze firing at 1150C on stoneware biscuit.

We have already identified silica, felspar, clay and frit as core glaze materials. This means that at least 2 of these materials are used in almost all glazes.

Using the same cake making analogy as before, these ingredients are considered the eggs, butter, flour and sugar equivalents of the glaze recipe!

The materials we might consider adding to these core materials could be:-

Limestone (calcium carbonate)

Needle-like crystals on glaze surface

Dolomite (calcium magnesium carbonate)

Zinc oxide

Alumina (aluminium oxide)

wollastonite (calcium silicate)

clay (alumino silicate)

These materials help to form crystals on the surface of the glaze on firing and thereby help create the matt (dull) texture. However these materials also influence how the glaze melts and bonds to the body on firing. It is an absolute necessity to match the glaze to the clay body or on cooling the glaze may just flake way like old paint! (Technically the glaze and body thermal expansion need to match so that the glaze is in compression after firing.) But lets not go too deeply into how we do that at this stage.

Alumina does not readily melt at this temperature so the likely (and easier) materials to use are zinc oxide, limestone, dolomite and wollastonite. Adding these materials in the right proportions to make a suitable glaze takes a lot of trial and error.

Developing the Glaze Recipe

If you start a with a basic 1250 C recipe as follows:

Base Glaze

Silica 38

Felspar 40

Clay 10

Limestone 12

and start replacing the silica and felspar with more fluxing ingredients that create crystals and allow you to fire at a lower temperature you might eventually reach a formula

Modified Glaze

Limestone 12

Dolomite 25

Felspar 20

Clay 25

Zinc oxide 4

Boron frit 9

Silica 5

Imagine how many test glazes you might need to make before arriving at such a detailed recipe? Note how different this is from the starting base transparent glaze! The material recipe is not the only part to consider when making glaze. The particle size of the glaze materials needs to be reduced to a fine powder by grinding with ceramic pebbles in water to less than 75 microns. Often, for best results, the mean particle size needs to be closer to 15 microns-the diameter of the finest human hair. This allows the glaze particles to react and melt during the firing process.

Firing the Glaze

The firing process is equally important in obtaining satisfactory and repeatable glaze results. Initially the firing cycle should remain constant as you develop your glaze recipe. A typical glaze cycle might be 150 C per hour ramp from room temperature to the peak at 1150 C, followed by a holding period (soak) at peak temperature of 1 hour, followed by kiln switch off and natural cool to room temperature.

Note that the cooling is often as important as the heating process when firing matt or crystal type glazes.

Clearly making glazes is quite a complex process. However, like the best potters, in time you will come to believe that this is what makes pottery glazing so interesting. You can never be sure what will come out of the kiln each day!

In the next of the series the use of ceramic colouring pigments to create even more interesting coloured pieces will be examined..

Pottery books of value

A great way of backing up your knowledge is to read some simple pottery making books. Some of the best books are those you keep going back to as your knowledge grows!

Thought for the Day

In pottery making it rarely goes exactly as you would like first time. Stay positive! Use it as a learning experience.

Henry Ford Quote:

"Failure is only the opportunity to begin again, only this time more wisely."

~ Henry Ford

Happy Potting
The potters Friend

More information and other technical articles on pottery and ceramics can be found at my website The Potters Friend. Go now to sign up for my free newsletter.

Why do I need frit in my glaze?

A glaze after firing can be considered to be a glass. Therefore it is not surprising that traditional glass making materials such as quartz, limestone, and felspar are commonly used to make glazes. However glazes which are intended for firing below 1150C need other elements such as lead or boron and alkalis to create the right properties. To enable these elements to be included safely they are often pre-melted with other glass making materials to form a FRIT.

What is a frit?

Borosilicate frit

Lead frit

China clay

A frit is a a pre-melted glass which is granular in nature. Once crushed and ground to a fine powder it provides the basis for all low firing glazes. Often a glaze contains merely one frit and clay. The clay is added as a suspending and binding agent to aid glaze storage, application and firing.

How many frits are there?

There are literally thousands of frits. The compositions have been researched and developed over a long time period to provide the right technical properties such as fusibility, thermal expansion and durability. A wide range of properties are needed to meet the wide range of bodies and firing cycles used by manufacturers and craft potters.In general terms frits are normally classified as transparent or opaque and then lead containing or lead free.For environmental/safety reasons lead containing frits are gradually being phased out and replaced with lead free alkali borosilicates.

Can I make my own frits?

It is possible but not recommended. Large scale frit manufacturers often make frit by a continuous method in a high temperature box type kiln using specialist refractory linings. These kilns produce tonnes of frit per day, meaning they can achieve consistent high quality output. For other than the most demanding glaze requirement, making your own frits is unlikely to be cost effective.

How many types of frit do I need?

This depends on the number of clay bodies and firing cycles you employ. As a basic requirement you need a transparent frit, an opaque frit and an expansion modifier frit. These should allow you to make transparent, opaque and semi opaque glazes suitable for conversion to coloured glazes by adding colouring pigments.

Why not use frits in all glazes?

In theory this is possible but the costs would be excessive. For example high temperature stoneware and porcelain glazes can be manufactured with lower cost glass making materials such as felspars, quartz, limestone and clays.

Where can I buy frits

Most pottery material distributors sell small quantities of powdered frit suitable for the studio or craft potter. Industrial scale potters may buy the frit direct from manufacturers such as Endeka, Ferro or Esmalglas.

Happy Potting
The Potters Friend

More information and other technical articles on pottery and ceramics can be found at my website The Potters Friend.      Go now to sign up for my free newsletter.

How to Choose a Pottery Class

The Benefit of Classes

Learning how to make pottery whilst enjoyable in its own right, can be enhanced by professional teaching and sharing of experience with other students.

Classes help people learn quicker and provide the right learning environment to enjoy the experience as well as make friends. This should not be underestimated as many frustrations will become apparent along the way..There are both studio potters who run classes in evenings and weekends as well as local colleges who run part time and full time courses.

Be clear on your needs

One question you need to ask yourself is "do I want to learn the practical skills such as throwing on a wheel or do I want to have a good scientific/artistic understanding?" Knowing this will help define your teaching requirement.

I recently read a debate about when should you call yourself a potter? It was interesting to note that most people shared my view that "you never stop learning in pottery". As pottery making is such a wide subject, you can be an expert in part of it and a mere novice in another area.

Therefore at which point you become expert or call yourself a potter is purely arbitrary.

This point is important as you need to find an expert teacher in the area of pottery in which you want to learn more. 

Choose the right teacher and class

Choosing the right pottery class is not always easy. For example, if you have an interest in learning the basics of  pottery making then joining a class learning about Raku firing is less useful. Similarly if you purely want to learn artistic skills such as hand painting of china as a hobby, there is no need to learn about slip casting of bone china. Clearly it is important to ask the right questions to make sure a class meets your specific needs.

Some helpful links

The following links and brief details of classes may be helpful. Unfortunately I cannot make recommendations as there are so many of which I am not personally familiar. Therefore when making an enquiry please ask for references from previous satisfied clients and ensure that the classes meet your needs etc

Good Luck and enjoy!

Pottery Classes in USA
Directory of Pottery Classes, Courses, Lessons, Events, Workshops, Free Classes, in USA
Pottery classes and Art courses in UK
Directory of Pottery,arts and crafts classes, workshops and painting holidays in Britain and Europe.

More details of individual classes and workshops can be found below:-

Details of UK pottery classes

More information and other technical articles on pottery and ceramics can be found at my website The Potters Friend. Go now to sign up for my free newsletter.

What is a glaze?

A mature pottery student recently asked me the question 'What is a ceramic glaze?' I hesitated whilst contemplating how to answer what initially seemed a very simple question. In the end I gave him 2 answers , a non technical one and a technical one. The precise amount of information he required depended much on how he wanted to use the information.

Sometimes too much information only leads to confusion!

For example an evening class student wanting only to paint pottery and later have it glazed and fired by an established potter needs only basic information.

In contrast a student studying pottery making and ultimately wishing to make and fire his own glazes needs a much more detailed chemical approach.

The Answers

These are the answers I gave him:-

1) A pottery glaze is a glassy coating applied to the surface of a ceramic to create a smooth, impervious, and decorative finish.

2) A pottery glaze is a mixture of ceramic materials which may often include minerals such as felspar and silica, a glass like component such as frit, clay as a suspending agent, and pigment as colouration. Many other minerals or oxides may also be used. These materials are finely ground in water to produce a glaze slip. Other organic and inorganic additives may at this stage be added to aid application. The slip is then applied to the ceramic body and fired to a sufficiently high temperature for the components to physically and chemically react to form a smooth glassy coating that bonds strongly to the body. Normally a temperature in excess of 1000C is required.

Do you have any simple questions you want answering? Please let me know.

More information on pottery making can be found at my website The PottersFriend