Starting out in Pottery? Read this first!

Making pottery is just like baking  a cake but more complex!

I can tell you one thing about pottery that is in-disputable. It is diverse and more complex than you could ever imagine. Think of it as being like baking a cake. There are literally thousands of different recipes and baking instructions, including the one your grannie used to make! Many of the cake recipes make great cakes but they are all slightly different.

 Clay bodies and glazes are just the same but even more complicated! This is what many potters find fascinating. They can develop their own clay body, glaze and process in a way that makes them special and their pottery products unique. Please remember that!

 However for the novice all this complexity creates confusion. Listening to more experienced potters providing a snippet of knowledge is not always good for you. Beginners try to relate it to their needs and often it results in failure.

 So here is what the beginner really needs to know and not forget.

Start with a pottery class

Start with a pottery class. Here you can learn the basics with the support of a tutor. You can meet new friends and even take comfort in that you are not alone in your struggles to learn a new skill! A good tutor will not only guide you but provide material recommendations to allow you to reach the next stage of working alone.

Choose a Quality Clay and Glaze supplier

Clay Body

If you must go it alone there are many suppliers out there who can help you make the right choice of initial materials. They have the experience and knowledge of a wide range of clay bodies and glazes.
Tell them what you want to make and how. For example. "I want to make pottery by using a potters wheel. I want to glaze it with a white glaze by dipping and I have a pottery kiln that has a maximum temperature of 1250C. "

They can then provide a clay and glaze that are compatible which when processed correctly will give you the best possibility of success.

Process the clay and glaze as recommended by the supplier 

Orton Cones

The making and firing process used to make the pottery is as important as the clay and glaze materials. Therefore process the clay and apply the glaze as recommended by the supplier. Fire the clay and glaze in the kiln as recommended by the supplier.  Firing is often controlled by a firing cycle input into an electronic controller and/or Orton cone values. For more information on firing read my detailed article how to properly fire your pottery.

Once you are happy with the finished result repeat it several times. This proves the process you have  used will work consistently as well as giving you confidence in your skills.

Make a note of the clay body, the glaze, the firing schedules and take a photo of the fired appearance. In this way you will always have a record of how to reproduce your great work of art!

Only once skilled add your own artistic flair

Making pottery is a combination of art and science. The art to design something unique and the science to make it into a product. Only when you have the basic pottery skills and can repeatedly create the same basic product should you become focused on artistic flair.

Developing  your own style and delight in making something unique

Lori Duncan Raku

Potters are often most satisfied when they have developed their unique style or products. Using baking as analogy, top bakers often specialise in making bread, cakes or pastries and have their one stand out dish. Likewise potters specialise in stoneware, raku or wood firing or other depending on their influences.

However they develop this over many years of making and studying pottery. 

So do not rush to specialise too early. What all master potters have in common is a strong basic knowledge of clay, glaze and firing.

Keep on learning and enjoy

Pottery making is meant to be enjoyable so make sure this happens. One way to do this is to continue to learn new things. In pottery making this is relatively easy as the subject is so diverse and changing that you never become a master of all.

Once adept at basic skills look at all elements of what you do not just the making technique. Using materials such as colour creatively can open a whole new spectrum of ware. For example if you only made plain glossy white, look at making some coloured glazed pieces.

One way to do this successfully is to enrol on a pottery course specialising on one type of technique. For example studio potters often run courses to help others develop their knowledge of raku or wood firing or sculpting etc. For more information see my list of pottery courses/classes available in the UK

Above all enjoy!

Good Luck
Happy Potting
The Potters Friend

How to Choose a Pottery Wheel

Buying a pottery wheel can be quite an expensive issue. Whilst second hand wheels exist it is difficult to judge their state of repair and future reliability. Therefore make sure you make an informed choice. So what factors should you consider when buying your pottery wheel? Weight of clay When choosing a pottery wheel the weight of clay you intend to throw decides the power of the motor you will need for a power driven wheel. Typical weights are as follows: ¼ HP for small pottery items 20lbs (10kgs approx) max for beginners ½ HP for medium sized items up to 100lbs (25 kgs approx) max suitable for most commercial potters 1 HP for large items 200lbs (50kgs approx) for experienced potters making very large items. Quality and ease of operation Quality of wheel can be an issue as it comes at a price. However you should also consider at least: Noise-older type wheels can be quite noisy whilst some recent models are whisper quiet Smoothness of pedal operation Smoothness of wheel particularly at low speeds- a jerky transition of speed can cause difficulties -important for delicate shaping Reversability-can it be used by left and right handed people? Electric or kick-wheel operation? Foot pedal or hand lever operation? Whilst kick wheel models may be cheaper they can take some getting use to if you are already used to an electric powered Wheel head size and predrilled holes- The wheel head size dictates the max diameter of clay piece which can be thrown. Holes in the wheelhead allow a bat (special disc) to be used. Pins allow release of the bat, holding the thrown piece, from the wheelhead. The thrown piece can then be removed easily for drying while a new piece is thrown. Mobility Some wheels are very light in weight and designed to be portable whilst others are meant to be static. Consider if you want to move the wheel between different locations. Heavy powerful wheels can be more durable and long lasting. Examples of different wheel types are: A Tabletop Wheel The Shimpo Aspire can handle your most creative challenges. Its lightweight, compact design makes it easy to transport, and a 20 lb centering capacity makes it a practical addition to any studio or classroom. The Aspire features a 1/3 HP, 100W DC motor, a 7" alloy wheel head, and a removable one-piece splash pan. The wheels speed ranges from 0–230 rpm, controlled by a hand lever. Also included are two 9¾" bats. It measures 9" H × 14½" W × 20" L and weighs 25 lb . Amazing, affordable, accommodating … Aspire! Shimpo’s Aspire Pottery Wheel includes a two-year limited manufacturer’s warranty.   A Powerful model suitable for seated use Brent wheel Model B is designed to fill the needs of schools and studio potters. Competitively priced, this wheel is quiet and solid under 150 lb (68 kg) loads of clay. A 1/2 HP motor provides the power and weight necessary for school use. A splash pan and 12" Plasti-Bat are included. Shipping weight is 112 lb (51 kg). Truck shipment is required. 10-year limited warranty. CE-certified. Super quiet model for seated use-The Shimpo's Whisper Potter's Wheel is extremely responsive, with high torque at all speeds. It's powerful, and by far the quietest pottery wheel on the market. The ½ HP, brushless DC motor has a direct drive (no belt) system and a broad speed range for optimum control. A fixed foot pedal with hand lever operates the electronically controlled motor. The motor is reversible for lefthanded and righthanded users. The 12" wheelhead and two-piece splash pan are standard. Centers up to 100 lbs. The wheelhead also turns freely, so it can be used as a banding wheel at 0 rpm.

Warranty and Cost Warranty and cost often go hand in hand. A warranty can be anything between 1 and 10 years and cost will be upward of $350 dollars for a new wheel. It is worth asking if it can be repaired locally within the warranty if anything goes wrong..

How to Choose a Pottery Class

The Benefit of Classes

Learning how to make pottery whilst enjoyable in its own right, can be enhanced by professional teaching and sharing of experience with other students.

Classes help people learn quicker and provide the right learning environment to enjoy the experience as well as make friends. This should not be underestimated as many frustrations will become apparent along the way..There are both studio potters who run classes in evenings and weekends as well as local colleges who run part time and full time courses.

Be clear on your needs

One question you need to ask yourself is "do I want to learn the practical skills such as throwing on a wheel or do I want to have a good scientific/artistic understanding?" Knowing this will help define your teaching requirement.

I recently read a debate about when should you call yourself a potter? It was interesting to note that most people shared my view that "you never stop learning in pottery". As pottery making is such a wide subject, you can be an expert in part of it and a mere novice in another area.

Therefore at which point you become expert or call yourself a potter is purely arbitrary.

This point is important as you need to find an expert teacher in the area of pottery in which you want to learn more. 

Choose the right teacher and class

Choosing the right pottery class is not always easy. For example, if you have an interest in learning the basics of  pottery making then joining a class learning about Raku firing is less useful. Similarly if you purely want to learn artistic skills such as hand painting of china as a hobby, there is no need to learn about slip casting of bone china. Clearly it is important to ask the right questions to make sure a class meets your specific needs.

Some helpful links

The following links and brief details of classes may be helpful. Unfortunately I cannot make recommendations as there are so many of which I am not personally familiar. Therefore when making an enquiry please ask for references from previous satisfied clients and ensure that the classes meet your needs etc

Good Luck and enjoy!

Pottery Classes in USA
Directory of Pottery Classes, Courses, Lessons, Events, Workshops, Free Classes, in USA
Pottery classes and Art courses in UK
Directory of Pottery,arts and crafts classes, workshops and painting holidays in Britain and Europe.

More details of individual classes and workshops can be found below:-

Details of UK pottery classes

More information and other technical articles on pottery and ceramics can be found at my website The Potters Friend. Go now to sign up for my free newsletter.

How To Teach Children about Pottery

Make it Fun
You make their first contact with pottery a fun enjoyable experience. Once they have the interest then you might want to add a little practical knowledge. Of course you want your children to be safe so only use safe materials and provide basic hygiene equipment, and instructions such as -wash your hands, and don't put anything in your mouth.

Where should you start?
Most children are familiar with playdo or plasticine. They have probably moulded these into shapes before. So let them use their imagination to form something that means something to them. Air drying or oven bake modelling clay products (suitable only for age over 3 years) similar to plasticine can be used which allow the pieces to be hardened into permanent shapes.

What next?
Once stimulated you might want to demonstrate how to roll a ball and make a sausage of clay and coil it to make a circular shape. Let them experiment making shapes themselves. Once adept at creating coils you might want to show them how to stack the coils to make a bigger shape. Plastic cutters such as used in cookery can be used to cut out shapes from a flattened out clay just like cutting shapes out of pastry.


What about painting colours?
Many of the items once air hardened or oven baked can be painted with acrylic paints. This allows children to learn a painting skill. The use of different size or shape of tip on brushes can help with children of different skill levels or ages. These skills can then be readily adopted and used with ceramic paints as the child progresses to making real pottery.

What about older children?
Older children need more to keep their interest so create a project and set them a challenge of making an item such as a coin tray. The same materials can be used as for younger children.

Alternatively get some real pottery clay and get them used to its feel and how water affects it and allows it to be smoothed or reprocessed when it dries out..  Of course this might become more messy but that's all part of the fun. Learn that large sections of clay crack on drying and why!

Sculpting tools can be used to  allow even more skills to be developed and create a personalisation of the work.

It is important to note that all items produced from the above information should be considered as purely decorative. Under no circumstance should they be used as food contact items.

Real pottery
In order to make real functional pottery special ceramic materials, glaze and colour need to be used as well as firing in a pottery kiln at very high temperatures (greater than 1000C). This requires some specialist knowledge and expertise. Pottery classes would be recommended at this stage to progress in a safe and friendly environment.

Acrylic paints and a domestic oven WILL NOT produce functional pottery.

More information about getting children to work with clay can be found at 'Teaching Tips for clay' Even more information and other technical articles on pottery and ceramics can be found at my website The Potters Friend. Go now to sign up for my free newsletter.

Learning to pottery blog

Today I learned to blog-is that the right term? Although not a technophobe I do believe most times 'its good to talk' as a rather outdated TV commercial once said. That said I am hoping that by embracing the latest social technology I can make contact with all those like myself who enjoy or have a passion for pottery and its making. Who knows it might be the start of a wider circle of friends?

My love for pottery has lasted over 30 years ever since I was introduced to the making of pottery 30 years ago. The decline in large scale pottery making over that time in the UK has been immense but it has left us still with a very rich heritage and many smaller but specialised potteries making everything from door knobs to large garden ceramics. Clearly there is still a lot of talent in the UK both in terms of design and making! If you are one of those or just starting up in pottery I'd be interested in your thoughts on the future of UK pottery plc!

More information on ceramics can be found at my website www.pottersfriend.co.uk